StressX could be mounted either in a closed cabin, suitable for laboratory analysis or on a four wheel trolley for on site analysis.
Residual Stress could be induced by machining, grinding, rolling, deep drawing, welding, thermal hardening and shot peening; its quantification allows to prevent fatigue damage and to control material’s durability and safety.
StressX provides a flexible solution to residual stress determination on samples of any dimensions by the original synergy between compact X ray diffractometer and 6-axis robot.
6-axis robots are available with positioning accuracy and repeatability as low as 20 μm and positioning range as high as 895 mm radius from robot center.
Measuring target is defined by a combination of a Video camera for X-Y pointing and a laser for Z positioning.
Laser accuracy can be less than 10 μm and measuring range can be as high as 300 mm from the goniometer center.
Thanks to the 6 degree of freedom the measuring positions and angular ranges are only limited by robot size.
Some specific applications of the Stress-X are listed below:
- Detection of Residual Stress on sprocket wheels
- Detection of Residual Stress on car motor parts (cam axles, connecting rods, engine shafts, equalisers, …)
- Detection of Residual Stress induced by deep drawing (household appliances, structural parts, …)
- Detection of existing Operational Stress on gas conducts
- Detection of Operational Stress on large tensioned structures
- Measurement of efficiency of Shot-Peening and rolling of components subjected to Stress
- Definition of the quantity of Retained Austenite on bearings and parts of diesel motor injectors
- Detection of Residual Stress in castings (cast iron parts of tool machines and aluminium components)
- Detection of Stress induced by welding (laser and electron)
- Search for a correlation between residual stress and stress resistance of aluminium alloy car rims
- Optimisation of working parameters for swarf removal to improve the stress resistance of mechanical components
- Detection of Residual Stress on helicoidal and leaf springs
- Search for critical zones after applying work loads (arms and aeronautics)
|X Ray Generator||Maximum Output Power||300 W|
|Output Stability||< 0.01 % (for 10% power supply fluctuation)|
|Max Output Voltage||30 kV|
|Max Output Current||10 mA|
|Voltage Step Width||0.1 kV|
|Current Step Width||0.1 mA|
|Ripple||0.03% rms < 1kHz, 0.75% rms > 1kHz|
|Preheat and Ramp||Automatic preheat and ramp control circuit|
|Input Voltage||230 Vac +/-10%, 50 or 60 Hz, single phase|
|X-Ray Tube||Type||Ceramic Cr Anode (options: other anode upon request)|
|Collimation||Monocapillary collimator: diameter 0.5-1-2 mm|
|Max Output||210 kW|
|Angular Range||10 or 22°|
|Angular accuracy||+/- 0.001°|
|Case||Dimensions||Width 658 mm, height 1059 mm, depth 762 mm|
|Leakage X-rays||< 1 mSv/Year (full safety shielding according to the international guidelines)|
|Processing Unit||Computer Type||Personal Computer, the latest version|
|Items controlled||X-ray generator, detector, counting chain|
|Basic Data Processing||Uni-axial, bi-axial and tri-axial stress state analysis.|